Visual Tour: Boot-menu Sabayon LiveCD/DVD

From Sabayon Wiki
Revision as of 23:37, 22 November 2012 by Aposteeltje (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
i18n: de en it tr

Welcome to the visual tour of booting Sabayon Linux.

In this process I will explain you what the different Menu options does.

Gnomevt.png

In order to boot the live cd/dvd all you have to do is make sure your bios is set to boot off of your dvdrom drive first. Check with your motherboard manual on how to change the boot order. So power up the computer and place the dvd into your drive. The computer should auto detect a bootable disk and you should be looking at a screen similar to the one to the right of here. Click Images to See Full Sizes

  • Start Sabayon 10 Gnome << this will start the Gnome Desktop with default settings.
  • Start Sabayon Media Center << same as above but based on the XBMC media Center.
  • Graphical Installation << this boots the default Desktop, and launches the Anaconda Installer.
  • Graphical Installation (Media Center) << same as above but installs Media Center as Default.
  • Text Installation << Console based Textual install method. You can navigate and select through the options using TAB and SPACE.
  • Safe Mode << boot with minimal stuff.
  • Console mode << Console mode will give you a fully working command line interface and can be very handy for a rescue cd.
  • Check Disc for Defects << This, i think is self explaining., it checks your disc for defects.
  • Debug mode, memory test, and Boot from first Hard disc << Debug mode is more or less for advanced users, and gives you a minimal Bash command prompt for debugging. Memory test will test your RAM memory, and Boot from first Hard disc simply will boot from the first hard disc.
Gnomevt2.png

This is the screen where we can enter in your boot parameters aka "cheat codes". We want to hit F5 and now you see the box that is displaying in the options.

Gnomevt3.png

We don't want to mess with any thing that is already in that box, we just want to simply add to it, so hit ESCAPE and place your cheat code" at the end of the line. You will adjust that to what ever you need for your hardware, now hit Enter - - Also see Boot Parameters at this page Sabayon_Linux#Boot_parameters_and_workarounds_for_problematic_Hardware and Tips#Cheat_Codes

Gnomevt4.png

And we are off and running!

Gnomevt5.png

You can hit F1 to see the following. This screen can be very important for troubleshooting boot up issues. Later, Once again the standard screen will come back, and you can hit F2 to see the boot process in verbose or just sit back and wait.

Gnomevt8.png

You may have some patience at this point and time to let it configure and get your video card ready for the eye candy.

But here we are: The beautiful Gnome desktop environment is ready for usage.


~wolfden~