HOWTO: Using VirtualBox
Because VirtualBox pulls a new kernel during install, before installing VirtualBox, i strongly advise to FIRST read this article:
so you won't get surprised. thank you.
However, if, for some reason you want to stick with your old kernel AND want to use VirtualBox, then follow the steps below.
# equo update
# equo install virtualbox-bin --nodeps
Normally the right modules should automatically be pulled, but in this example we're using the "--nodeps" option, so:
# equo install virtualbox-modules#`uname -r`
# depmod -a
# modprobe vboxdrv
# modprobe vboxnetadp
# modprobe vboxnetflt
# usermod -a -G vboxusers YOUR_USER_NAME
After this you must log out and log in, otherwise you'll get "Permission denied" error if you try to run "VirtualBox" command.
To get virtualbox modules to load automatically:
# nano -w /etc/conf.d/modules
add to it:
modules="vboxdrv vboxnetflt vboxnetadp"
then save and exit, reboot.
Sometimes, for some reason after installation, the package isn't available, accessible, or missing in the Menus.
In this case, simply reinstall VirtualBox without the "--nodeps" option:
# equo install virtualbox-bin
Now it should be available.....
Setup a Guest OS
Setting the Guest OS up, is a case of following the Wizard, which is very intuitive.
1) Open VirtualBox
2) Click on New
3) Click on Next
4) Add a name for your OS (Lets assume you are installing WinXP) so enter Windows XP
5) Choose the OS Type from the drop down menu (Windows XP)
6) Click Next
7) Set your base memory size, (as a rule of thumb, never set this to more than half the host machines actual memory, otherwise the host grinds to a halt)
8) Click Next
9) This will take you to the hard disk allocation page, where on a new install you will need to click on New and launch another Wizard,
10) Virtual Disk image type, set this to Dynamically expanding image
11) Click Next
12) Set the image name to WinXP and the Image size to something over 4Gb
13) Click Next
14) A Summary will display, click finish
15) This will take you back to the Virtual Hard disk page, where you will be able to select the WinXP hard disk from the drop down menu
16) Click Next
17) Click on Finish
18) This will take you back to the Main Virtualbox interface.
To Launch the New system click on it once, and click on start. and the Virtual system will start to load, however with no CD in the CD Rom the system will probably stop when it looks for an OS.
You can load the Guest OS either from the CD-ROM, or from an ISO image, which is setup via the Settings option, when the Virtual machine is powered down.
Now if you are using Virtualbox to run Windows XP as the guest OS, it is worthwhile loading the Guest Additions
The Guest additions allow you to do some really funky stuff, like have the mouse pointer work across both guest and host applications: Better Video drivers, and Seamless integration.
In the “Devices” menu in the virtual machine’s menu bar, VirtualBox has a handy menu item named “Install guest additions”, which will automatically bring up the Additions in your VM window.
If you prefer to mount the additions manually, you can perform the following steps:
1. Start the virtual machine where you have installed a Windows guest operating system.
2. Select “Mount CD/DVD-ROM” from the “Devices” menu in the virtual machine’s menu bar and then “CD/DVD-ROM image”. This brings up the Virtual Disk Man- ager.
3. In the Virtual Disk Manager, press the “Add” button and browse your host file system for the VBoxGuestAdditions.iso file:
• On a Linux host, you can find this file in the additions folder under where you installed VirtualBox (normally /opt/VirtualBox-1.5.0).
4. Back in the Virtual Disk Manager, select that ISO file and press the “Select” but- ton. This will mount the ISO file and present it to your Windows guest as a CD-ROM.
Once you have rebooted the Guest System, you can click on Machine -> Seamless mode and the apps you launch in the Guest OS, will behave no in a window, but actually on your desktop environment.