Difference between revisions of "HOWTO: Get AMD/ATI or Nvidia Video Cards working in Sabayon"
m (→AMD - New Sabayon install w/FGLRX)
|Line 79:||Line 79:|
- UEFI -
- UEFI -
Select "Advanced Options"
Select "Advanced Options"
Select "Disable "
Boot Live Disc
Boot Live Disc
Revision as of 10:47, 14 June 2014
- 1 Kernel Upgrade (optional)
- 2 AMD - New Sabayon install w/FGLRX
- 3 AMD - Open Source to FGLRX
- 4 NVIDIA
Kernel Upgrade (optional)
Method 1 (kernel-switcher tool)
This method should automagically install the corresponding driver updates and addons such as the zfs mod.
Lets see what is available!
localhost root # kernel-switcher list
Find a kernel you wish to use, and switch!
localhost root # kernel-switcher switch linux-sabayon-3.14.6-r1
Method 2 (Manual)
This method isn't better or worse than kernel-switcher. It just allows you to know exactly whats going on, what you are doing, and what is changing. This method doesn't automagically upgrade drivers or install addons such as virtualbox addons or the zfs mod.
localhost root # equo install sys-kernel/linux-sabayon localhost root # equo install sys-kernel/sabayon-sources
Now use eselect to set the soft links(shortcuts) to the proper libraries and files. eselect allows us to keep different libraries so we can switch without damaging the system by replacing important files.
First off we need to know which is our new kernel and bzimage
localhost root # eselect bzimage list localhost root # eselect kernel list
You should get something like this...
localhost root # eselect bzimage list Available kernel targets:  kernel-genkernel-x86_64-3.13.0-sabayon *  kernel-genkernel-x86_64-3.14.0-sabayon localhost root # eselect kernel list Available kernel symlink targets:  linux-3.13.0-sabayon  linux-3.14.0-sabayon * localhost root #
Now select the newer bzimage and kernel.
localhost root # eselect bzimage set 2 localhost root # eselect kernel set 2
Once your new kernel is installed reboot!
AMD - New Sabayon install w/FGLRX
Upon booting your Live Disc, you will notice a GRUB screen that varies based on UEFI and NON-UEFI.
- UEFI -
Select "Advanced Options" Select "Disable Kernel Mode Settings (for AMD Radeon GPUs with FGRLX)" Boot Live Disc
- NON-UEFI -
Press F5 for "Other Options" Select "nomodeset" Boot Live Disc
AMD - Open Source to FGLRX
Lets prepare the system for a fresh install of the ati-drivers package and block the conflicting driver Radeon at boot. be sure to look at the first part of the line. $ is for user while # is for root!
[email protected] ~ $ su localhost root # equo update --force localhost root # equo remove ati-drivers localhost root # equo remove xf86-video-ati localhost root # equo remove x11-base/xorg-drivers localhost root # equo remove --configfiles xf86-video-ati localhost root # echo "blacklist radeon" >> /etc/modprobe.d/blacklist.conf
If your radeon module is still loaded after boot and you have added it to the modprobe blacklist, look into /etc/conf.d/modules to see if it is listed in the modules line.
Now we need to disable KMS (Kernel Mode Setting)
localhost root # nano /etc/default/grub
You will notice a Difference. I have highlighted in Red what needs to be added.
# Copyright 1999-2012 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 # $Header: /var/cvsroot/gentoo-x86/sys-boot/grub/files/grub.default-2,v 1.2 2012/06/28 22:36:53 floppym Exp $ # # To populate all changes in this file you need to regenerate your # grub configuration file afterwards: # 'grub2-mkconfig -o /boot/grub2/grub.cfg' # # See the grub info page for documentation on possible variables and # their associated values. GRUB_DEFAULT=saved GRUB_DISTRIBUTOR="Sabayon" GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=5 GRUB_DISABLE_LINUX_UUID=true GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_CMDLINE_LINUX="nomodeset" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console
Populate the changes
localhost root # grub2-mkconfig -o /boot/grub/grub.cfg
OK, lets install the drivers and set the links to the GL libraries.
localhost root # equo install x11-drivers/ati-drivers-14.4#$(uname -r) ati-userspace amdcccle localhost root # eselect opengl set ati localhost root # eselect opencl set amd
Need an updated or new xorg.conf? If you weren't using fglrx before then... yes. Backup old and update.
localhost root # cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bak localhost root # /opt/bin/aticonfig --initial
OK now reboot!
Once you login and decide you want to set resolutions and extra settings, open amdcccle.
Once you have everything working you can remove the old kernel if you like. MAKE SURE YOU SELECT THE CORRECT KERNEL! Look using "equo search linux-sabayon" then copy and paste!
[email protected] ~ $ su localhost root # equo remove sys-kernel/linux-sabayon-3.13.11
If you're looking at this. We are either curious or ran into a snag.
Good News: everything is reversible!
Bad News: you're stuck in a terminal until its fixed! But you knew that didn't you ;)
With your computer powered off, connect the computer to the internet via a cable and then press the power button. When you reach the Grub selection screen press an arrow key to halt the timer and select the "Advanced Options....". Then you will select the option with "(Recovery Mode)"
This will take you through the normal boot process, then will put you at a CLI screen and request the root password. Enter the root password and you will be brought into a terminal as root!
Now to start putting things back!
localhost root # equo update localhost root # equo remove ati-drivers ati-userspace amdcccle localhost root # equo install xf86-video-ati localhost root # equo install x11-base/xorg-drivers localhost root # eselect opengl set xorg-x11 localhost root # sed -i '/blacklist radeon/d' /etc/modprobe.d/blacklist.conf localhost root # sed -i 's/\<nomodeset\>//g' /etc/default/grub localhost root # cp /etc/X11/xorg.conf.bak /etc/X11/xorg.conf
Now reboot! Now you are back on the Open Source Drivers! You will keep your upgraded kernel so that was not reverted. (reason for less steps)
If for some reason you don't have proprietary Nvidia drivers installed and you want them, there are simple steps to follow.
Update package database
First thing is to make sure that package database is up to date.
# equo update --force
Available driver version
To get a list of all drivers for all kernels that are available:
$ equo search -qv nvidia-drivers
List of all drivers versions available for currently running kernel:
$ equo search -qv nvidia-drivers#$(uname -r)
Knowing what driver version you want to install (usually the newest, i.e. highest number version, it may differ if you have old card that needs older drivers):
Newest drivers for currently running kernel
# equo install --ask nvidia-driver#$(uname -r) nvidia-userspace
Will install newest driver available for currently running kernel.
Older drivers for currently running kernel
List Nvidia drivers for your current kernel (insturctions above), and install it along with corresponding nvidia-userspace, e.g.:
# equo install --ask nvidia-drivers-304.108#$(uname -r) nvidia-drivers-304.108
Block nouveau driver
For Nvidia drivers to work properly nouveau can't be loaded. Thus, it must be blocked.
# echo blacklist nouveau >> /etc/modprobe.d/blacklist.conf
Set Nvidia drivers as active
# eselect opengl set nvidia